TECHNICAL SPECIFICATIONS
Newtest Powertimer 300 -series
|
|
|
Battery
|
12V 1.3 Ah sealed lead-acid battery
|
|
Battery lifetime with full charge
|
Typically 10h with one battery (photocells and jump mat in use)
15h with two batteries (optional)
|
|
Battery charge time
|
4 h (8 h for the first 3 charges)
Yellow light in the case panel will show when voltage of battery is low. After that operating time with photocells and jump mat is 15 min.
|
|
Charger
|
Input voltage 100 - 240V, output 13.9V DC/2000 mA
Available with plugins EUR, UK and US
|
|
Operating temperature
|
-20 – +40°C (-4 – +104°F)
|
|
Protection class
|
IP 40 (photocells IP 67)
|
|
Accuracy
|
0,001 s (time measurement)
±1 mm (jump heights)
|
|
Sensing range of the photocells
|
Fixed field sensors, 0.2 - 2 meters (adjustable)
|
|
Sensing range of jump mat
|
30 mm - 1200 mm
|
|
Size of the jump mat
|
950 mm x 840 mm x 4 mm
|
|
PC requirements
|
PowertimerPC requirements:
- Windows 2000 or later
- Free USB or serial port
- 6 MB disk space
- Microsoft .NET Framework 1.1 or later
(the software is also included on the same CD with PowertimerPC)
- Internet connection for automatic software updates
- A Powertimer measurement hardware with a serial port
Powertimer Analyzer requirements:
- Windows 95, 98, ME, NT, 2000, XP
- 32 MBRAM (128 MB recommended)
- 100 MB disk space
- Internet connection for automatic software updates
USB-to-serial adapter kit requirements:
- Windows 95SE/ME/2000/XP
- At least one available USB port
|
|
Cables
|
2 pcs 30 m cable, marked 1 m intervals
|
|
Tripods
|
Height 400 mm (transport) - 1150 mm (setup)
|
|
Size of the carrying case
|
625 mm x 575 mm x 184 mm
|
|
Weight
|
15 kg (case, photocells, jump mat, cables)
|
|
General requirements for EMC directive
|
Emission; EN50081-1
Immunity; EN50082-1 (IEC 61000-6-1)
|
